Looking for Parts

This board is for watch related technical discussions and for posts requesting watch parts. If you can supply the part(s) requested, please contact the person who made the request by using email or the private message button.

Looking for Parts

Postby shelle » February 6th, 2012, 10:27 pm

Hello everyone.

I am looking for a pallet bridge or a second hand movement for an Audemars Piguet 2003; the movement is measuring a diameter of 20.90mm.

Also, I am looking for a second hand movement in good shape for a Lady Eterna-Matic and Automatic; the movement is round and it has a diameter of 18.00mm.

If you can help me with either or both it would be greatly appreciated! Thanks!
Attachments
120206-162233-01-04-30806.jpg
Gents Audemars Piguet Movement
120206-162233-01-04-30806.jpg (209.02 KiB) Viewed 5294 times
120206-161857-01-04-30804.jpg
Lady Eterna-Matic Movement
120206-161857-01-04-30804.jpg (179.09 KiB) Viewed 5294 times
shelle
 
Posts: 2
Joined: February 6th, 2012, 10:10 pm

Re: Looking for Parts

Postby gregn » March 20th, 2012, 10:56 pm

Hello,
How much are you looking to spend on the Eterna Movement?
Greg Nalbandian CW21
Magic Touch Jewelry & Watch Repairs
5658 Mission Center Rd. Suite 305
San Diego, CA 92108
Tel: 619-260-1700
Fax: 619-260-1771
Email: Info@magictouchjeweler.com
website: http://www.magictouchjeweler.com
gregn
 
Posts: 12
Joined: December 29th, 2011, 4:10 pm
Location: San Diego, CA 92108

Re: Looking for Parts

Postby shelle » March 21st, 2012, 2:07 pm

Hello,

How much does the movement cost?
shelle
 
Posts: 2
Joined: February 6th, 2012, 10:10 pm

Re: Looking for Parts

Postby gregn » March 21st, 2012, 6:03 pm

There's some on ebay listed for about $200
Greg Nalbandian CW21
Magic Touch Jewelry & Watch Repairs
5658 Mission Center Rd. Suite 305
San Diego, CA 92108
Tel: 619-260-1700
Fax: 619-260-1771
Email: Info@magictouchjeweler.com
website: http://www.magictouchjeweler.com
gregn
 
Posts: 12
Joined: December 29th, 2011, 4:10 pm
Location: San Diego, CA 92108


Return to Watch Related Technical Discussions & Parts Requests

Who is online

Users browsing this forum: No registered users and 0 guests

cron