BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//American Watchmakers - Clockmakers Institute - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:American Watchmakers - Clockmakers Institute
X-ORIGINAL-URL:https://www.awci.com
X-WR-CALDESC:Events for American Watchmakers - Clockmakers Institute
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:UTC
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0000
TZNAME:UTC
DTSTART:20180101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Halifax
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20190310T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20191103T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20200308T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20201101T050000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0400
TZOFFSETTO:-0300
TZNAME:ADT
DTSTART:20210314T060000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0300
TZOFFSETTO:-0400
TZNAME:AST
DTSTART:20211107T050000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20190310T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20191103T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=UTC:20200504T080000
DTEND;TZID=UTC:20200508T150000
DTSTAMP:20260527T051049
CREATED:20200115T014348Z
LAST-MODIFIED:20200115T014348Z
UID:41912-1588579200-1588950000@www.awci.com
SUMMARY:Watch 432: Advanced Precision Timing
DESCRIPTION:This course will teach high level experienced watchmakers the latest timing techniques and skill set associated with precision timing. You will utilize the latest timing equipment and procedures to efficiently adjust and time a watch to the highest standards. Prerequisites: CW21 or equivalent certification required. \n  \nThe purpose of this course is to teach the high level experienced watchmakers the latest timing techniques and skill set associated with precision timing.  The class centers around the watchmaker being able to assess and perform to the highest standards necessary.  Learn to successfully complete the timing requirements used on modern watches.  Some older vintage watches may also be used to see how the effects of your adjustments may vary. \n  \nThe goal of the class is simply to make you truly proficient in all aspects of timing and positional adjustments.  This class is primarily designed to improve existing skills\, while learning to incorporate newly found skills and techniques.  Refining and mastering skills are the priority during the class.  This is an advanced class.
URL:https://www.awci.com/event/watch-432-advanced-precision-timing/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2020/01/20190405_101825-scaled.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20200430T200000
DTEND;TZID=America/Halifax:20200430T213000
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42392-1588276800-1588282200@www.awci.com
SUMMARY:Ask the Watchmaker: Online Get Together
DESCRIPTION:This informal webinar is a fun get together with a panel of professional watchmakers. We have put together a panel of watchmakers from different parts of the industry with experience at some of the biggest brands. Submit your questions ahead of time or ask them during the GTG as AWCI President\, Aaron Recksiek\, moderates the discussion. Don’t forget to practice getting your watch in focus with your webcam. In order to maintain the GTG feel we want to invite everyone to share their webcams during the webinar. \n  \nAWCI Webinar \nWebinar: Ask the Watchmaker Get Together \nApril 30\, 2020 8PM EDT \n \nFREE \nAfter you register you will receive an email with the link to join the meeting. \nPresenters: \n\n		\n		\n			\n				\n			\n				\n				Bernhard Stoeber\, CW21\, retired Rolex\, Movado Group\, Omega\n				\n			\n				\n			\n				\n				Deam Powell\, CW21 Brinkers Jewelers\n				\n			\n				\n			\n				\n				Drew Zimmerman\, CW21 Zimmerman Watch Repair\n				\n			\n				\n			\n				\n				Robert Flood\, CW21 Richemont NA\n				\n			\n		\n\nRobert Flood\, CW21 Richemont NA \nBernhard Stoeber\, CW21 Retired from Rolex\, Movado Group\, Omega \nDean Powell\, CW21 Brinkers Jewelery \nDrew Zimmerman\, CW21 Zimmerman Watch Repair \nModerator: \nAaron Recksiek\, CW21 AWCI President
URL:https://www.awci.com/event/askthewatchmaker/
LOCATION:OH
CATEGORIES:Education,Industry Event,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2020/04/20190712_144105848_iOS-scaled.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200429T080000
DTEND;TZID=UTC:20200501T170000
DTSTAMP:20260527T051049
CREATED:20200228T184941Z
LAST-MODIFIED:20200228T184941Z
UID:42159-1588147200-1588352400@www.awci.com
SUMMARY:Postponed - Clock 120: Introduction to Clockmaking
DESCRIPTION:  \nInstructor: Kenneth P. De Lucca\, Ph.D. \nLocation: AWCI Headquarters\, Harrison\, OH \nAWCI member Cost: $595 \nThis introductory course is to present the learner with the various aspects of clocks. There is much to know! What will be stressed in this 3-day hands-on educational program will be an examination of an American style time/strike movement. This movement is a most common example of clocks found in repair centers. \n  \nDay 1: After observing how the clock movement functions as a time/strike movement\, the learner will start with examining the movement as a time only movement\, the strike train will be removed. The educational program on day one will center upon starting with the power source (open main spring) and safety considerations. Study will then explore the motion works and related components to the dial hands. After this\, there will be an examination of the escapement (recoil). Students will become proficient at disassembly and reassembly of this “time only” movement during Day 1. It is recommended that the learner complete at least five (5) disassembly/reassembly activities of the time only train side of the movement. \n  \nDay 2 experiences will center upon the strike train and its related components. As with the time only experience\, there will be discussion of mainspring power safety and containment. There will be a discussion of “Lock”\, “Warning”\, “Run”\, and back to “Lock” sequence. The necessary motion works components will be included to trip the strike train into operation. All necessary lever action will be considered and explained. Like the time train side of the movement\, it is recommended that the learner complete at least five (5) disassembly/reassembly activities of the strike train side of the movement. \n  \nDuring day 3\, the learner will “pull it all together”. Since the American style time/strike movement is often times the “bread and butter” of many clock repair centers\, participants will be requested to disassemble and reassemble the movement at least five (5) times. This will surely uncover trials and pitfalls of this process. Upon completion of reassembly\, each movement will be checked for proper operation\, along with being in beat\, proper synchronization of the strike train and related concerns. Many of these performances are required for successful completion of the Twenty First Century Clockmaker Standards & Practices. The ultimate goal of certification will be discussed. \n  \nRequired Materials: \nMainspring “C” clamps to contain power (two per movement). \nWinding keys for movements. \nLet down keys for movements. \nHook (such as dental pick or the like).                                               \nTweezers.nng \nEye magnifiers. \n¼ inch nut driver and/or pliers.
URL:https://www.awci.com/event/clock-120-introduction-to-clockmaking/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/IMG_9304.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200429
DTEND;VALUE=DATE:20200430
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42296-1588118400-1588204799@www.awci.com
SUMMARY:Webinar: Watch Basics 2: The Swiss Lever Escapement: What is it and how does it work?
DESCRIPTION:This webinar is perfect for the watch collector\, enthusiast\, beginner horologist\, or salesperson. Join us as we dive deeper into the watch and explain how the Swiss Lever Escapement has been helping watches keep time for the past 300 years. We will use illustrations\, models\, and actual watches to demonstrate the action of the escapement. This is your opportunity to see in greater detail what goes on behind the dial. You don’t want to miss it. \nAWCI Webinar \nWebinar: Watch Basics 2: The Swiss Lever Escapement: What is it and how does it work? \nOn Demand \n \nAWCI Members: FREE \nGeneral Public: $15  \nPresenters:  \nJason Champion\, CW21 & Jordan P.Ficklin\, CW21 \nAWCI
URL:https://www.awci.com/event/webinar-watch-basics-2/
LOCATION:OH
CATEGORIES:Education,Webinar
ATTACH;FMTTYPE=image/png:https://www.awci.com/wp-content/uploads/2020/04/LubricationGood.png
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200425T080000
DTEND;TZID=UTC:20200427T170000
DTSTAMP:20260527T051049
CREATED:20190917T203728Z
LAST-MODIFIED:20190917T203728Z
UID:41285-1587801600-1588006800@www.awci.com
SUMMARY:Postponed - CW21
DESCRIPTION:  \nDue to the COVID-19 pandemic the state of Ohio has ordered business like ours to temporarily not-open through April 6th. \n  \nDuring this time\, essential staff will be working from home. We will have access to email and will do our best to respond\, but please remember that our resources will be limited. \n  \nMany AWCI resources are available online. If you are looking for technical information\, or current class schedules\, please visit old.awci.com \n  \nThank you for your understanding. \n  \nAWCI Staff \nWe will soon have an exam set for September and likely one during the summer months. \n  \nMultiple components will be available for examination.
URL:https://www.awci.com/event/cw21-2/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Certification,Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2017/10/CW21-cert-e1511980802567.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20200422T131500
DTEND;TZID=America/Halifax:20200422T141500
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42307-1587561300-1587564900@www.awci.com
SUMMARY:Webinar: Basic Clock Knowledge
DESCRIPTION:Join David LaBounty\, CMC FBHI as he explains essential knowledge for anyone dealing with clocks and clock repair. \nAWCI Webinar \nWebinar: Basic Clock Knowledge \nApril 22nd\, 1:15PM EDT \n \nAWCI Members: FREE \nGeneral Public: $15 Live Webinar $10 Recorded Webinar \nPresenter:  \nDavid LaBounty\, CMC FBHI \nAWCI
URL:https://www.awci.com/event/webinar-basic-clock/
LOCATION:OH
CATEGORIES:Education,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2017/04/potential_clock_cover.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200421
DTEND;VALUE=DATE:20200422
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42295-1587427200-1587513599@www.awci.com
SUMMARY:Webinar: Essential Chronograph Knowledge & Adjustments
DESCRIPTION:Join AWCI’s Tom Schomaker\, CMW21 as he outlines the essential functions\, checks\, and adjustments for modern chronograph movements. Examples will be provided from the Omega 861\, ETA 7750\, and Dubois Depraz Modular Chronograph movements. This webinar is excellent for all skill levels. It is an excellent review for the seasoned professional\, a great start for the beginner\, and absolutely essential for those preparing to become Certified Watchmakers of the 21st Century (CW21). \nAWCI Webinar \nWebinar: Essential Chronograph Knowledge & Adjustments \nAvailable anytime \n \nAWCI Members: $25 \nGeneral Public: $50 \nPresenters:  \nTom Schomaker\, CMW21 & Jason Champion\, CW21 \nAWCI
URL:https://www.awci.com/event/webinar-chronograph-knowledge/
LOCATION:OH
CATEGORIES:Education,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2017/12/Illustration-ETA7750.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200420T080000
DTEND;TZID=UTC:20200424T170000
DTSTAMP:20260527T051049
CREATED:20190917T180757Z
LAST-MODIFIED:20190917T180757Z
UID:41253-1587369600-1587747600@www.awci.com
SUMMARY:Watch 220: Modern Mechanical Chronograph
DESCRIPTION:The purpose of this course is to teach the student all the fundamentals of modern mechanical automatic watch repair that are most prevalent on today’s market. The student will learn how to perform the various diagnostics in evaluating the condition of the various components\, cleaning\, assembling\, adjustments\, dialing and casing. \nPrerequisites: \n\nHaving at least three (3) years in mechanical watch repair\nWATCH 190:21st Century Watchmaking Standards course\nReading pages 169-188 of the book The Theory of Horology is essential prior to attending the course.\n\nCost $1095 for AWCI members $1245 for non-members \nContact AWCI education director Jason Champion to register for this class at education@awci.com or 866-367-2924 extension 303
URL:https://www.awci.com/event/watch-220-modern-mechanical-chronograph-2/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/7750.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20200415
DTEND;VALUE=DATE:20200416
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42292-1586908800-1586995199@www.awci.com
SUMMARY:Webinar: Watch Basics 1: How a Watch Works & Watch Nomenclature
DESCRIPTION:This webinar is perfect for the watch collector\, enthusiast\, beginner horologist\, or salesperson. Join us as we explain the basic parts of the watch case and mechanical hand-wound movements. This is your opportunity to see what goes on behind the dial. We will cover the names of all the components and describe their function. We will be disassembling the watch and demonstrating how each of the components interact and answering your questions as we go through the process. You don’t want to miss it. \nAWCI Webinar \nWebinar: Watch Basics 1: How a Watch Works & Watch Nomenclature \nAvailable Anytime \n \n  \nAWCI Members: FREE \nGeneral Public: $10 Recorded Webinar \nPresenters:  \nJason Champion\, CW21 & Jordan P.Ficklin\, CW21 \nAWCI
URL:https://www.awci.com/event/webinar-watch-basics-1/
LOCATION:OH
CATEGORIES:Education,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/04/HowAWatchWorks-marketing-1.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Halifax:20200408T131500
DTEND;TZID=America/Halifax:20200408T141500
DTSTAMP:20260527T051049
CREATED:20200402T165317Z
LAST-MODIFIED:20200402T165317Z
UID:42272-1586351700-1586355300@www.awci.com
SUMMARY:Webinar: Maintaining Your Health While Handling Customer Timepieces in the Era of COVID-19
DESCRIPTION:This webinar is especially for those of you still working on clocks and watches during this epidemic\, whether you are open to the public or not\, but will be essential information for everyone as we return to working with the public again.  \nAWCI Webinar \nMaintaining Your Health When Handling Customer Timepieces During the Era of COVID-19 \nAvailable On Demand \n \n  \nAWCI Members: FREE \nGeneral Public: $10 Recorded Webinar \nWe have all handled some pretty dirty watches\, and not every home you visit for a house call is as clean as you would hope. Join us to learn what precautions you should take when handling timepieces so you can protect your health. Share your experiences as we learn from each other and adapt our businesses in the new era of COVID-19. \nGuest Presenter:  \nSarah Mireles Jacobs\, M.D. \nUniversity of Alabama at Birmingham School of Medicine
URL:https://www.awci.com/event/webinar-maintaining-your-health-while-handling-customer-timepieces-in-the-era-of-covid-19/
LOCATION:OH
CATEGORIES:Education,Webinar
ATTACH;FMTTYPE=image/png:https://www.awci.com/wp-content/uploads/2020/04/Maintaining-Health-e1585832201679.png
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200406T080000
DTEND;TZID=UTC:20200410T170000
DTSTAMP:20260527T051049
CREATED:20190917T180616Z
LAST-MODIFIED:20190917T180616Z
UID:41251-1586160000-1586538000@www.awci.com
SUMMARY:Postponed - Watch 210: Quartz and Quartz Chronograph Service Procedures and Diagnostics
DESCRIPTION:We will work to reschedule this event this year. \nThe purpose of this course is to teach the student all the fundamentals of modern quartz watch repair and quartz chronographs that are most prevalent on today’s market. The student will learn how to perform the various important electronic tests e.g. current consumption\, coil resistance\, lower working voltage\, fault finding etc. including disassembly and service of the movement. \nPrerequisites: \n\nSome basic understanding in electronic watch functions\,\nKnowledge of watch terminology.\nOwnership of the book The Theory of Horology is essential. Must read\, chapter 15 of The Theory of Horology\, prior to attending the course.\nIt would be of extreme benefit for the student to be familiar with some watch theory and also previous experience in watch repair.\nWATCH 190\n\nSwiss calibers covered include: Ronda 715 and Ronda 8040.B (ETA 955.xxx if time allows) \nCost: $1095 for AWCI members $1245 for non-members \nClass Schedule: 5 days\, Monday – Thursday 8:00 a.m. – 5:00 p.m. Friday 8 a.m. – 3 p.m. \nFeel free to contact our education director Jason Champion with any questions at education@awci.com or at 866-367-2924 extension 303.
URL:https://www.awci.com/event/watch-210-quartz-and-quartz-chronograph-service-procedures-and-diagnostics/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/12/Judit_CMYK.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200404T090000
DTEND;TZID=UTC:20200404T180000
DTSTAMP:20260527T051049
CREATED:20191216T200726Z
LAST-MODIFIED:20191216T200726Z
UID:41943-1585990800-1586023200@www.awci.com
SUMMARY:Postponed - Build a Watch - Indianapolis\, IN
DESCRIPTION:Join AWCI as we team up with Red Bar Indy for a great Build a Watch Event.  We will be holding this class on our state of the art Archie Perkins Mobile Horology Classroom.  Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 6 dials\, and 4 different styles of hands and is taught on our brand-new state of the art mobile classroom. \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n  \n \n 
URL:https://www.awci.com/event/indy-baw/
LOCATION:Meridan Tower Indianapolis\, IN\, 10201 N Illinois St\, Indianapolis\, IN\, 46290\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/BAW-For-your-Store.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200401T130000
DTEND;TZID=UTC:20200401T140000
DTSTAMP:20260527T051049
CREATED:20200331T174937Z
LAST-MODIFIED:20200331T174937Z
UID:42240-1585746000-1585749600@www.awci.com
SUMMARY:Webinar: Online Education Capabilities and Support during the COVID-19 pandemic
DESCRIPTION:We know that many of you have adjusted your businesses due to COVID-19 and government regulations. We have changed the way we do things as well. We are working from home\, but we are stilling thinking about all of you and your needs. One of the exciting things we have been working on is acquiring technology and resources to present new online learning and webinars. \nJoin us on Wednesday April 1 at 1 PM EDT for an exploratory webinar from AWCI. \nFree AWCI Webinar  \nApril 1st\, 1PM EDT (We’re not fooling around) \n \nWebinar Capabilities and Future Online Classes \nOur number one objective in this webinar is to demonstrate our webinar capabilities and to hear from each of you. After you have seen our capabilities\, we want to know what you would like to see in future webinars from AWCI. \nFacing the  business challenges of COVID-19 \nGuest Presenter: Nicholas L. Simon\, Partner KMK Law \nThe second focus of the meeting is to hear what challenges you have faced due to the COVID-19 pandemic and how you are coping with these challenges. We will share some of our experiences and we hope you will share your experiences. We are all in this together. \n\nLearn which material suppliers are still open and how you can place orders\nLearn about assistance for small business from state and federal agencies including details passed in the CARES Act\nShare your experiences and learn from others\n\n\n  \nPlease register for AWCI Education Opportunities and COVID-19 Support on Apr 1\, 2020 1:00 PM EDT at: \nhttps://attendee.gotowebinar.com/register/3783902602627584525 \nAfter registering\, you will receive a confirmation email containing information about joining the webinar. \nBrought to you by GoToWebinar®\nWebinars Made Easy®
URL:https://www.awci.com/event/webinar-online-education-capabilities-and-support-during-the-covid-19-pandemic/
LOCATION:OH
CATEGORIES:Education,Industry Event,Webinar
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2020/03/webinar-2636738_640.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200326T080000
DTEND;TZID=UTC:20200328T170000
DTSTAMP:20260527T051049
CREATED:20191219T215723Z
LAST-MODIFIED:20191219T215723Z
UID:41847-1585209600-1585414800@www.awci.com
SUMMARY:Postponed - Time Con
DESCRIPTION:  \nJoin AWCI for our annual convention in Cincinnati\, OH!
URL:https://www.awci.com/event/time-con/
LOCATION:Summit Hotel\, 5345 Medpace Way\, Cincinnati\, OH\, 45227\, United States
CATEGORIES:Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/11/60logo.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20200309T080000
DTEND;TZID=America/New_York:20200313T170000
DTSTAMP:20260527T051049
CREATED:20190917T175505Z
LAST-MODIFIED:20190917T175505Z
UID:41243-1583740800-1584118800@www.awci.com
SUMMARY:WATCH 150: Service on the Watch Case: Crystals\, Crowns\, Tubes and Water Resistance
DESCRIPTION:  \nThe purpose of this new course is to teach the much overlooked skills involved with casing. Many skills are needed when dealing with the wide variety of complex case designs. We will explore crystals\, case buttons\, crowns and case tubes. These components will be serviced (ie taken apart\, gaskets replaced\, lok-tite applied\, etc). Complete disassembly of the cases will be done using the case press and a multitude of various dies. You will learn the proper ways to utilize the case press while minimizing the risk of damaging components.  In addition\, waterproof testing (both dry and wet methods) will be taught and applied to all of the watch cases you work on. This class also allows for the proper casing and uncasing of a few different types of quartz and mechanical movements as well. \nThis would be great course for: \n\nA new or existing polisher\nNew or existing Watch Technician\nWatchmaker who hasn’t had this type of training\nWatchmaker whom needs updating of these skills\nWatchmaker / Technician who wants to learn water testing on a multitude of different machines.\n\n  \n Prerequisites:  none \n  \nCourse objectives  \nThe student will learn about: \n\nGluing in crystals\nRemoving fixed and rotating bezels\nThe case press usage and its variables\nMeasuring and selecting the proper gaskets\nThe Systematic approach of disassembly and assembly\nFitting a case tube plus Loctite\nApplication of Fomblin to gaskets and caseback threads\nDealing with accessories such as case back screws\, helium valves and more\nWater testing the case (utilizing both the wet and dry methods\n\n  \nThis is a full hands-on course \n\nThis course deals with a variety of case designs\n\n  \nCost: $1095 for AWCI members $1245 for non-members \nClass Schedule: 5 days\, Monday – Thursday 8:00 a.m. – 5:00 p.m. Friday 8 a.m. – 3 p.m. \nFeel free to contact our education director Jason Champion with any questions at education@awci.com or at 866-367-2924 extension 303. \n  \n Essential materials for the student to bring \n  \nHand-tools should be provided by the student. Ownership of quality hand tools is an expectation of a Professional Watchmaker. The brand name Bergeon mentioned below is used to help you identify the tools from the most popular tool catalogs; you are welcome to choose a brand of your choice\, as long as\, it is of equal or better quality.   \n  \nCheck with your supplier for the recommended hand tools or their equivalents. \n  \n\n\n\n\n                                 \n                                 Watch Encasing Case \n        TOOL LIST  \n\n\n  \n\n\n\n\nDescription  \n\n\nBergeon  \n\n\n\n\n1. Buff stick leather 6.0 mm wide with plexi-cover # 4056-6 \n\n\n1282-D      4056-6 \n\n\n\n\n2. Casing cushion \n\n\n5394 \n\n\n\n\n3. Cloth (lint-free) Selvyt or Micro-fiber  \n\n\n  \n\n\n\n\n4. Dust-blower (rubber) \n\n\n5733 \n\n\n\n\n5. Knife to sharpen pegwood \n\n\n  \n\n\n\n\n6. Loupe 4X or 5X  \n\n\n  \n\n\n\n\n7. Loupe 10X or higher for inspection \n\n\n  \n\n\n\n\n8. Oilers (plastic handle\, spade tipped)  small sizes   Bergeon only    \n\n\n7013 or 30102 \n\n\n\n\n9. Plexi-stick  (clear style preferred) \n\n\n6436 \n\n\n\n\n10. Rodico or Rub-off \n\n\nRodico # 7033 \n\n\n\n\n11. Screwdrivers\, with stand (Bergeon\, Horotec\, Vaucher\, etc.)  \n\n\n  \n\n\n\n\n12. Tweezers\, brass\, bronze or nickel  \n\n\n  \n\n\n\n\n 
URL:https://www.awci.com/event/watch-150-care-for-the-watch-case-5-watches-in-5-days/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/Inside-of-HR-valve.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200307T090000
DTEND;TZID=UTC:20200307T180000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41939-1583571600-1583604000@www.awci.com
SUMMARY:Build a Watch - Portland\, OR
DESCRIPTION:Join AWCI at Chris King Precision Components in Portland Oregon for a Build A Watch class on March 7\, 2020. \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \nOur Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 6 dials\, and 4 different styles of hands. \n  \n  \n \n  \n \n 
URL:https://www.awci.com/event/pdx/
LOCATION:Chris King Precision Components\, 2801 NW Nela St\, Portland\, OR\, 97210\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200217T080000
DTEND;TZID=UTC:20200221T150000
DTSTAMP:20260527T051049
CREATED:20191125T212656Z
LAST-MODIFIED:20191125T212656Z
UID:41554-1581926400-1582297200@www.awci.com
SUMMARY:Watch 100: Introduction to Watchmaking
DESCRIPTION:  \n \n  \n  \n  \nA survey course for the new or prospective watchmaker covering the basic skills and techniques used by the modern watchmaker. This class is perfect for anyone thinking about entering the profession of watchmaking or for the individual who just wants to gain a better appreciation for the art of watchmaking.  \n \nThis course is a foundational course ideal for someone who is a collector\,  new to watchmaking or wanting to know more about how a watch works. \nOur week long introduction to watchmaking class is a week long full curriculum which walks you through a number of watchmaking fundamentals including movement tech guides\, cleaning and lubrication\, endshakes\, the ETCACHRON regulation system\, timing\, dialing and casing as well as fundamental watchmaking nomenclature and best practices. \nThere are no prerequisites for this class and we provide all the tools needed for the class\, with the exception of a watchmakers loupe.  If you have any questions feel free to reach out to Jason Champion our education director at education@awci.com or at 513-367-9800 ext 303 \nPrerequisites: none \nCost: $1095 for AWCI members $1245 for non-members \nClass Schedule: 5 days\, Monday – Thursday 8:00 a.m. – 5:00 p.m. Friday 8 a.m. – 3 p.m. \nFeel free to contact our education director Jason Champion with any questions at education@awci.com or at 866-367-2924 extension 303. \n 
URL:https://www.awci.com/event/watch-100-introduction-to-watchmaking-3/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/11/DSCN0305.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200215T090000
DTEND;TZID=UTC:20200215T170000
DTSTAMP:20260527T051049
CREATED:20191216T200726Z
LAST-MODIFIED:20191216T200726Z
UID:41807-1581757200-1581786000@www.awci.com
SUMMARY:Build a Watch Richter & Phillips Jewelers - Cincinnati\, OH
DESCRIPTION:Join AWCI as we team up again with Richter & Phillips Jewelers for a great Build a Watch Event.  This year we will be in our Archie Perkins Mobile Horology Classroom parked in front of their beautiful store.  Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands and is taught on our brand-new state of the art mobile classroom. \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n  \n \n 
URL:https://www.awci.com/event/build-a-watch-richter-and-phillips/
LOCATION:Richter & Phillips\, 601 Main Street\, Cincinnati\, OH\, 45202\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/BAW-For-your-Store.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200210T080000
DTEND;TZID=UTC:20200214T170000
DTSTAMP:20260527T051049
CREATED:20190917T175017Z
LAST-MODIFIED:20190917T175017Z
UID:41241-1581321600-1581699600@www.awci.com
SUMMARY:WATCH 180: Basic Watch Servicing
DESCRIPTION:The purpose of this course is to teach the student the basics of a modern mechanical watch with some complication\, such as a calendar or another feature. The size of the movements used will be smaller than those used in the Introduction class and the 21st Century class. They will consist of both new and older regulation technologies. Some of the major focus points will be on oiling with precision\, timing analysis\, troubleshooting and calendar lubrication and assembly. This class will include common repairs such as fitting a stem and crown\, measuring\, crystal fitting of simple round crystal and waterproof testing of the watch using the latest testing equipment. \n  \n Prerequisites:  at least one of the following classes: \nIntroduction to Watch Repair \n21st Century Watchmaking \n      \n Course objectives \nThe student will learn about: \n\nThe definitions and a brief history of the mechanical chronograph and its various components\nThe study of the basic features and functions\nThe functioning and special care of the calendar system\nThe Systematic approach of disassembly & problem diagnosis.\nModern assembly procedures\nModern oiling procedures\nETACHRON and the Swiss Gate adjusting procedures\nTiming & Adjustments\nFitting a stem and crown\nMeasuring and fitting a round crystal and crystal gasket\nWater testing the case.\n \n\n\nThis is a full hands-on course\n\n  \nCost: $1095 for AWCI members $1245 for non-members \nClass Schedule: 5 days\, Monday – Thursday 8:00 a.m. – 5:00 p.m. Friday 8 a.m. – 3 p.m. \nFeel free to contact our education director Jason Champion with any questions at education@awci.com or at 866-367-2924 extension 303. \n  \n Essential materials for the student to bring \n  \nHand-tools should be provided by the student. Ownership of quality hand tools is an expectation of a Professional Watchmaker. The brand name Bergeon mentioned below is used to help you identify the tools from the most popular tool catalogs; you are welcome to choose a brand of your choice\, as long as\, it is of equal or better quality.   \n  \nCheck with your supplier for the recommended hand tools or their equivalents. \n  \n\n\n\n\n                                Basic Watch Repair II \n        TOOL LIST  \n\n\n  \n\n\n\n\nDescription  \n\n\nBergeon  \n\n\n\n\n1. Barrel Arbor Holder  size 1.00 mm \n\n\n30610 Diam. 1.00 \n\n\n\n\n2. Barrel closing tool  \n\n\n  \n\n\n\n\n3. Bench block \n\n\n  \n\n\n\n\n4. Buff stick leather 6.0 mm wide with plexi-cover # 4056-6 \n\n\n1282-D      4056-6 \n\n\n\n\n5. Casing cushion \n\n\n5394 \n\n\n\n\n6. Cloth (lint-free) Selvyt or Micro-fiber  \n\n\n  \n\n\n\n\n7. Dust-blower (rubber) \n\n\n5733 \n\n\n\n\n8. ETACHRON regulator adjusting tool  \n\n\n  \n\n\n\n\n9. Knife to sharpen pegwood \n\n\n  \n\n\n\n\n10.  Hand or flat File with handle     cut # 4    6 inches long x 3/4 inch wide  Grobet \n\n\n311.148 Casker \n\n\n\n\n11.  Hand removers or Levers \n\n\n  \n\n\n\n\n12. Loupe 4X or 5X  \n\n\n  \n\n\n\n\n13. Loupe 10X or higher for inspection of oiling and cap jewels \n\n\n  \n\n\n\n\n14. Dial side movement holder for 11 ½ ligne round  \n\n\n  \n\n\n\n\n15. Movement holder (Slick/Bergeon/Horotec) (large) \n\n\n4040 \n\n\n\n\n16. Oilers (plastic handle\, spade tipped)  small sizes   Bergeon only    \n\n\n7013 or 30102 \n\n\n\n\n17. Oil cups\, die-cast alloy\, 4 separate cups (or more) \n\n\n30180-A \n\n\n\n\n18. Oiler (automatic No. 1A) (optional) \n\n\n2718-1A \n\n\n\n\n19. Plexi-stick  (clear style preferred) \n\n\n6436 \n\n\n\n\n20. Rodico or Rub-off \n\n\nRodico # 7033 \n\n\n\n\n21. Screwdrivers\, with stand (Bergeon\, Horotec\, Vaucher\, etc.)  \n\n\n  \n\n\n\n\n22. Sliding pin vise \n\n\n  \n\n\n\n\n23. Tweezers\, brass\, bronze or nickel  \n\n\n  \n\n\n\n\n24. Tweezers\, antimagnetic\, No. 5   \n\n\n6671-5 \n\n\n\n\n25. Tweezers\, antimagnetic\, No. 3   \n\n\n6671-3 \n\n\n\n\n26. Tweezers for hands\,  type F   (Fontax or Horotec)   polished steel tips                   Horotec 12.301-F1 or 12.302-F1 \n\n\n 
URL:https://www.awci.com/event/watch-180-basic-watch-servicing/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/09/Lam-Jake.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200208T090000
DTEND;TZID=UTC:20200208T160000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41774-1581152400-1581177600@www.awci.com
SUMMARY:Build a Watch - Orlando\, FL
DESCRIPTION:  \nJoin AWCI’s Watchmaking professionals as we journey to Orlando\, FL on February 8th\, 2020 for a day of watchmaking with Orlando Watch Co. Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands. \n \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n  \n 
URL:https://www.awci.com/event/build-a-watch-orlando-fl/
LOCATION:Orlando Watch Company\, 329 N Park Ave #103\, Winter Park\, FL\, 32789\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200125T090000
DTEND;TZID=UTC:20200125T170000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41826-1579942800-1579971600@www.awci.com
SUMMARY:Build a Watch - Dallas\, TX
DESCRIPTION:  \nJoin AWCI’s Watchmaking professionals as we journey to Dallas\, TX on January 25th\, 2020 for a day of watchmaking. Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands. \n \n \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n \n 
URL:https://www.awci.com/event/dfw/
LOCATION:Hilton Arlington\, 2401 E. Lamar Blvd\, Arlington\, TX\, 76006\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200118T090000
DTEND;TZID=UTC:20200118T160000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41776-1579338000-1579363200@www.awci.com
SUMMARY:Build a Watch - Phoenix\, AZ
DESCRIPTION:  \nJoin AWCI’s Watchmaking professionals as we journey to Phoenix\, AZ on January 18th\, 2020 for a day of watchmaking. Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands. \n \n \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n \n 
URL:https://www.awci.com/event/chicagowatch-2-2-3-2/
LOCATION:Inventory Adjusters\, 3437 E McDowell Rd\, Phoenix\, AZ\, 85008\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200112T090000
DTEND;TZID=UTC:20200112T160000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41768-1578819600-1578844800@www.awci.com
SUMMARY:Build a Watch - San Diego\, CA
DESCRIPTION:  \nJoin AWCI’s Watchmaking professionals as we journey to San Diego\, CA on January 11th\, 2020 for a day of watchmaking. Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands. \n \n \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n \n 
URL:https://www.awci.com/event/chicagowatch-2-2-2/
LOCATION:Crowne Plaza San Diego – Mission Valley\, 2270 Hotel Circle North\, San Diego\, CA\, 92108\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200111T090000
DTEND;TZID=UTC:20200111T180000
DTSTAMP:20260527T051049
CREATED:20181109T190331Z
LAST-MODIFIED:20181109T190331Z
UID:41366-1578733200-1578765600@www.awci.com
SUMMARY:Build a Watch - San Diego\, CA - SOLD OUT
DESCRIPTION:SOLD OUT \nJoin AWCI’s Watchmaking professionals as we journey to San Diego\, CA for a day of watchmaking. Our Build a Watch 2.0 includes a newly designed in-house watch case in stainless steel or pvd\, your choice of 4 dials\, and 3 different styles of hands. \n \n  \nThis is your opportunity to assemble a Swiss Made ETA 6497 movement\, lubricate the moving parts\, install a dial and hands\, and case up your very own watch before wearing it home. The event includes lunch. \n \n  \n 
URL:https://www.awci.com/event/chicagowatch-2/
LOCATION:Crowne Plaza San Diego – Mission Valley\, 2270 Hotel Circle North\, San Diego\, CA\, 92108\, United States
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2018/06/IMG_0349-1x.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200106T080000
DTEND;TZID=UTC:20200110T170000
DTSTAMP:20260527T051049
CREATED:20190917T181223Z
LAST-MODIFIED:20190917T181223Z
UID:41258-1578297600-1578675600@www.awci.com
SUMMARY:Watch 350: Tool Making for Watchmakers and Clockmakers: The Watchmaker's Lathe II
DESCRIPTION:
URL:https://www.awci.com/event/watch-350-tool-making-for-watchmakers-and-clockmakers-the-watchmakers-lathe-ii/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200106T080000
DTEND;TZID=UTC:20200110T170000
DTSTAMP:20260527T051049
CREATED:20190917T174124Z
LAST-MODIFIED:20190917T174124Z
UID:41239-1578297600-1578675600@www.awci.com
SUMMARY:Watch 250 The Essential Micromechanics - The Watchmakers Lathe I
DESCRIPTION:Join us at AWCI headquarters for one of these great Lathe classes.  In Watch 250 you will learn Basic Micromechanics skills on the lathe.
URL:https://www.awci.com/event/watch-250-the-essential-micromechanics-the-watchmakers-lathe-i-and-watch-350-tool-making-for-watchmakers-and-clockmakers-the-watchmakers-lathe-ii/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2017/11/Armen-9-e1511992890621.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20200106T080000
DTEND;TZID=UTC:20200110T170000
DTSTAMP:20260527T051049
CREATED:20190311T172630Z
LAST-MODIFIED:20190311T172630Z
UID:40883-1578297600-1578675600@www.awci.com
SUMMARY:Watch 350: Tool making for watchmakers & Clockmakers: The watchmaker's Lathe II
DESCRIPTION:  \nThis course is a continuation to Watchmaker’s Lathe I and the purpose is to teach the student the necessary knowledge and hand-skills to manufacture various parts in steel that will be functional in a mechanical watch\, e.g. the winding stem. \n  \nPrerequisite:  \nWatch 250: Essential Micromechanics – The Watchmakers Lathe I or Instructor approval \n 
URL:https://www.awci.com/event/watch-350-tool-making-for-watchmakers-clockmakers-the-watchmakers-lathe-ii/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/03/06182008-002.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20191216T080000
DTEND;TZID=UTC:20191216T170000
DTSTAMP:20260527T051049
CREATED:20191216T185007Z
LAST-MODIFIED:20191216T185007Z
UID:41802-1576483200-1576515600@www.awci.com
SUMMARY:NAWCC National Convention
DESCRIPTION:AWCI will be that the 2020 NAWCC National Convention on June 25th-28th.  Join us in Dayton\, OH for this great event.
URL:https://www.awci.com/event/nawcc-national-convention/
LOCATION:dayton convention center\, 22 E Fifth Street\, Dayton\, Ohio\, 45402
CATEGORIES:Education,Mobile Classroom
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/06/6CC55E5F-2B8F-401C-9F6E-071FCD9786BC.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=UTC:20191111T080000
DTEND;TZID=UTC:20191115T170000
DTSTAMP:20260527T051049
CREATED:20190311T171951Z
LAST-MODIFIED:20190311T171951Z
UID:40877-1573459200-1573837200@www.awci.com
SUMMARY:Watch 100: Introduction to Watchmaking
DESCRIPTION:  \n \nA survey course for the new or prospective watchmaker covering the basic skills and techniques used by the modern watchmaker. This class is perfect for anyone thinking about entering the profession of watchmaking or for the individual who just wants to gain a better appreciation for the art of watchmaking. Class Schedule: 5 days\, Monday – Thursday 8:00 a.m. – 5:00 p.m. Friday 8 a.m. – 3 p.m.
URL:https://www.awci.com/event/watch-100-introduction-to-watchmaking/
LOCATION:AWCI – Harrison\, Ohio\, 701 Enterprise Dr\, Harrison\, OH\, 45030\, United States
CATEGORIES:Education
ATTACH;FMTTYPE=image/jpeg:https://www.awci.com/wp-content/uploads/2019/03/Emily-Landscape.jpg
ORGANIZER;CN="AWCI":MAILTO:education@awci.com
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20191025
DTEND;VALUE=DATE:20191028
DTSTAMP:20260527T051049
CREATED:20190123T005117Z
LAST-MODIFIED:20190123T005117Z
UID:40773-1571961600-1572220799@www.awci.com
SUMMARY:Florida Watchmakers Association Annual Convention
DESCRIPTION:
URL:https://www.awci.com/event/florida-watchmakers-association-annual-convention/
LOCATION:Tampa\, FL\, Tampa\, FL\, United States
CATEGORIES:Affiliate Chapters,Education,Mobile Classroom
END:VEVENT
END:VCALENDAR